Industrial Door Engineering Limited
Home Repair & Service Contact Us Links Location
Our Products:
Roller Shutters
Push Up Roller Shutters
Tube Motor Roller Shutters
Insulated Roller Shutters
Fire Roller Shutters
Tube Motor Fire Roller Shutters
Insulated Sectional Overhead Doors
Hinged Steel Fire Doors
Hinged Steel Security/Fire Exit Doors
Folding Shutters
Insulated Sliding Doors
PVC Strip Curtains
Rapid Action Doors
speedroller economic
speedroller standard
• speedroller heavy
Impact Doors
Colour Chart
DHU
Ordering/Queries

Speedroller Heavy

The speedroller is an electrically driven fast action roller door. These doors are used in industrial and commercial buildings for purposes of energy saving, draught exclusion and climate control.

Specification/construction

The speedroller is not fitted with balance springs. The door is built up of horizontal profiles, which are wound on a steel roller above the door opening by a means of an electric motor/gearbox. An optional tensioning system in the vertical guides ensures that the door curtain remains tightly tensioned during operation and in the closed position. A reinforced 3 mm PVC door curtain material with integrated wind bars is used. A vision section is available as standard. The closing edge of the door consists of an aluminium beam fitted with a flexible rubber floor seal. Vertical side guide channels fitted with brush seals, guide and seal the door panel. The side channels can be opened for assembly and maintenance purposes.
Material
  • galvanised steel roller.
  • door curtain of reinforced 3 mm PVC, available in blue or orange.
  • side channels manufactured from folded galvanised steel plate and fitted with brush seals.
  • bottom beam made of aluminium and supplied with a flexible soft rubber seal.
    Dimensions
     as an inside or outside door max. 6000 x 6000 mm 
     width guide channels 225 mm 
     Space required, non motor/operator side 275 mm 
     Space required, motor/operator side 470 mm 
     Space required for installation, motor/operator side min. 750 mm 
     headroom 615 mm 
     overall projection (from the wall) 400 mm 
    Drive
    The drive unit consists of an electric motor/gearbox unit, which drives the drum directly and is fitted as standard with an anti-roll-off device. Drive unit mounted on the right (standard location) or on the left.

    Controls
    The control system incorporates a wide variety of functions such as :
  • open position duration either via a delay timer or via "push-open/push-closed" operation.
  • "service mode"
  • LED indicators enabling rapid fault finding
  • choice of permanently open or permanently closed.
    Operation
    The control box has 2 push buttons (open-close) as standard, an emergency/stop switch and a 4-pole disconnectable main power switch. Various actuators can be used: pull switch, key switch, push button, photocell, radar, induction loop detection or remote control. Other types on request.

    Performance
    The opening and closing speed is 1 m/s
    Safety
  • the door can be cranked open in the event of power failure.
  • the bottom beam is fitted with a self-testing safety edge, which stops the door and immediately causes it to re-open if an obstacle is encountered during closure.
  • the side guide channels are fitted as standard with a safety photocell with a reflector (400mm from the floor). The door will not close if the beam is broken.
    Mounting structure requirements and connection
  • the power supply must be present within 500 mm of the control box.
  • required installation space as indicated in the illustration below.
  • a stable, flat mounting surface or steel frame for mounting the door.
    Technical specifications
    Mains voltage - 3N~400V/50Hz/16A
    Degree of protection - IP54
    Temperature range - 0°C - + 40°C
    Accessories / Options
  • 1,2mm thick door curtain, blue, yellow, black or orange. Note! max. wind resistance with 1,2mm thick door curtain is 5 Beaufort.
  • door curtain tensioning : option up to 3000 x 3000 mm
  • plastic rain hood over roller/drive or both
  • side guides painted in RAL colour
  • break Away bottom beam (crash resistant). Limits wind resistance to 5 Beaufort
  • elasticated Crash proof bottom beam (limits wind resistance to 5 Beaufort, max. 5000 x 5000 mm, door curtain material 1,2 mm).
  • emergency opening facility
  • other electrical supply specifications
  • electrical components IP65
  • Frequency invertor control
    Opening speed - 1,5 m/s
    Closing speed - 0,75 m/s
  • actuation using push buttons, pull switches, photocells, radar detectors, induction loop detection and remote control
  • half-height operation
  • interlocking switch in combination with another door
  • traffic light switching (red/green, red or green)
    (all dimensions are installed dimensions)