Industrial Door Engineering Limited
Home Repair & Service Contact Us Links Location
Our Products:
Roller Shutters
Push Up Roller Shutters
Tube Motor Roller Shutters
Insulated Roller Shutters
Fire Roller Shutters
Tube Motor Fire Roller Shutters
Insulated Sectional Overhead Doors
Hinged Steel Fire Doors
Hinged Steel Security/Fire Exit Doors
Folding Shutters
Insulated Sliding Doors
PVC Strip Curtains
Rapid Action Doors
speedroller economic
• speedroller standard
speedroller heavy
Impact Doors
Colour Chart
DHU
Ordering/Queries

Speedroller Standard


Fast action roller door for interior use
The speedroller is an electrically driven fast action roller door. These doors are used in industrial and commercial buildings for purposes of energy saving, draught exclusion and climate control.

Specification, construction

The speedroller is not fitted with balance springs and consists of a door curtain which is wound on a steel roller above the door opening by means of an electric motor/gearbox. The door curtain is made up of horizontal polyester reinforced plastic sections. The door curtain contains a transparent vision section at between 1200 mm and 2200 mm from the floor. The closing edge of the door consists of an aluminium beam fitted with a flexible rubber seal. The door curtain is guided in U-shaped profiles fitted with brush seals. The side guides form an integral whole with the bearing plates for fixing the top roller and drive unit.
Material
  • horizontal steel roller
  • guide channels manufactured from folded galvanized steel plate and fitted with brush seals
  • door panel made of reinforced PVC (1,2mm thick), available in blue, yellow, black or orange
  • vision section, made of transparent PVC
  • lower beam made of aluminium and supplied with a flexible soft rubber seal.
    Dimensions
     Max. width (interior door, wind pressure force 4) 4000 mm 
     Max. width (interior door, wind pressure force 5) 3000 mm 
     Max. height 5000 mm 
     Space required, non motor/operator side 160 mm 
     Space required, motor/operator side 300 mm 
     Space required for installation, motor/operator side min. 550 mm 
     Width guide channels 110 mm 
     Head room 550 mm 
    Drive
    The drive unit consists of an electric motor/gearbox unit, which drives the drum directly and is fitted as standard with an anti-roll-off device. Drive unit mounted on the right (standard location) or on the left.

    Controls
    The electrical control box contains a control PCB offering the following standard functions:
  • open position duration adjustable between 5 - 80 seconds
  • "service mode" for assembly and maintenance
  • LED indicators enabling rapid fault finding
    Operation
    As standard the control box has 2 push buttons (open-close), an emergency/stop switch and a 4-pole disconnectable main power switch.
    Various actuators can be used.


    Performance
    The opening and closing speed is 1 m/s

    Technical specifications
    Mains voltage - 3N~400V/50Hz/16A
    Degree of protection - IP54
    Temperature range - 0°C - + 40°C
    Safety
  • in the event of power failure the door can be cranked open by hand
  • the lower beam is fitted with a self-testing safety edge, which stops the door and immediately opens it again when the door encounters an obstacle while closing. The door then remains open until reset
  • a safety photocell with a reflector is mounted on the guide channels (400 mm from the floor) as standard. When the beam is interrupted the door will not close
  • the drive unit is specified with an integrated anti-roll-off device
    Mounting structure requirements and connection
  • power supply must be present within 500 mm of the control box
  • required installation space as indicated in the illustration
  • a stable, flat mounting surface or steel frame for mounting the door
    Accessories / Options
  • Plastic rain hood over roller/drive or both
  • Side guides painted in RAL colour
  • Break Away bottom beam (crash resistant)
  • Other electrical supply specifications
  • Electrical components IP65
  • Frequency invertor control
    Opening speed - 1,5 m/s
    Closing speed - 0,75 m/s
  • Actuation using push buttons, pull switches, photocells, radar detectors, induction loop and remote control
  • Half-height operation
  • Interlock switching in combination with another door
  • Traffic light switching (red/green, red or green)
    Option Packs
  • 3 mm thick door curtain, transparent, blue or orange
  • Economic option pack
  • Food option pack
  • Polara option pack
    (all dimensions are installed dimensions)