HINGED DOORS - PERSONNEL/FIRE EXIT - SPECIFICATION

DOOR LEAF

Manufactured from 1.2mm or 1.6mm zintec steel, double skinned with interlocking seams reinforced vertically with interlocking channels. Spaces are filled with Dufaylite honeycomb core. Door leaf thickness is 45mm.

DOOR FRAME

Manufactured from 1.6mm zintec formed to a single or double rebated profile in welded or knock down form, reinforced and fitted with fixing plates. Depth of frame can vary to suit brick, block and steelwork or to span a cavity. Standard sizes are 100mm x 38mm for single rebated frames and 145mm x 38mm for double rebated frames.

HINGES

All hinges are stainless steel ball bearing butt hinges. The number and size depend upon the size and weight of the particular door leaf.

CILLS

A number of different types of cills are available depending upon the application. Fire exit doors always open outwards and normally come with a stepped cill that prevents water ingress. Personnel doors tend to come with sloping cills so as to avoid a trip hazard. Aluminium cills that are approved for disabled access are also available.

IRONMONGERY - PERSONNEL DOORS

The most common types of ironmongery for personnel doors are lever handles on one/both sides of the door leaf, a sashlock and latch complete with euro profile key cylinder on one/both sides of the door leaf or an internal thumb-turn in lieu of the key cylinder.

IRONMONGERY - FIRE EXIT DOORS

The most common types of ironmongery for fire exit doors are panic bars with either single point locking, two point locking (top and bottom) or triple point locking (side, top and bottom). External locking knobsets can be provided.

FINISH

Doors are finished in etch primer ready for immediate painting. A powder coated finish is optional and can be provided at extra cost.